Laser bridge sawing machine vertical sawing machine of a variety of types, fault is also a variety of varieties, laser bridge sawing machine to you to identify the small knowledge of bearing fault sawing machine.
1) laser bridge sawing machine can be identified by working temperature
This method belongs to the comparative identification method and is only used in the case that the operating state of sawing machine does not change too much. For this reason, continuous temperature recording is necessary. When a fault occurs, not only will the temperature rise, but also irregular changes will occur.
2) laser bridge sawing machine is identified by sound
Sound recognition requires a lot of experience. Must be sufficiently trained to recognize bearing and non-bearing sounds. To that end, as much as possible, this should be done by dedicated personnel. The sound of the bearing can be clearly heard by applying the audifier or the listening stick to the housing of the sawing machine motor.
3) laser bridge sawing machine is identified by the state of lubricant
Samples of lubricants were analyzed to determine whether the degree of turbidity was mixed with foreign substances or metal powders. This method is especially effective for sawing machine bearings or large bearings that cannot be observed closely.
