Wire Saw Machine Block Cutting

Block Wire Saw Machine Description

Wire Saw Block cutting machine has steady structure, including top beam, two upright column, square box, hydraulic station tension unit, two big flywheel. Left side install a driven big flywheel and hydraulic station tension unit. Tension device controls diamond wire saw tension or loosen, meanwhile keep the diamond wire saw Right side install a driving flywheel and main motor, it can control the speed of wire  between 0-40m/s via inverter. the machine can cut different kind of stone material. This machine is controlled by four axis linkage CNC system. Machine lifting and trolley movement are controlled by servo motor. Guide wheel rotating adopt step system. We can write program and set cutting parameter in the cnc control panel. The cnc system can read the DXF files and automatically make the program when put the U disk to the USB interface of cnc system. If there are any complex graphics, can draw graphics by AutoCAD and save as DXF format. Trolley move by Screw rod. Screw rod is soaked with oil in the protective cover of screw rod (Patent product). The machine will stop automatically and display failures on the screen if wire broken. CNC Wire Saw Block Cuttingmachine has a water spray system. if no water or not enough water, the machine will automatically stop.

Block Wire Saw Machine Details

Block Wire Saw Machine Specifications