1, the operator must have general knowledge of the use of machinery and electrical appliances, operation to remember to wear insulation hand.
2, in the stone cutting machine before starting up, be sure to check all parts of the bolt, nut is loose, check the power supply, wiring there is no leakage of electricity, check the direction of the saw blade is placed and the direction of the arrow shield is consistent, check can be used after starting up.
3, when cutting the bevel or bevel needs to tilt the machine head, should first turn the machine head up and down the fan elevation to the top part, and then loosen the bolt tilt the head above. To prevent the head from tilting down during operation, hold the head by hand when loosening the bolt.
- Remember to check and repair the machine regularly during use. The travelling axle under the table, the main bearing parts and the bearing parts of the manual feed device shall be inspected regularly to remove dirt and grease. In the process of work noise or abnormal zhendong, to stop the machine in time to check, remove the abnormal situation before starting use.
